Joint pull gravity loading lever and suspension
Dry wood lever with shaped hard-mineral fulcrum, independent arm datums and replaceable fiber suspension transfers captive gravity load to pull/peel jaws; friction, travel and force-ratio uncertainty open.
Discovered · unresearchedClosure: OpenInventory incomplete
Capability requirements and tolerances
Consumer-specific numerical targets, quantities and acceptance limits remain open or incompletely reviewed. No smartphone-grade suitability is claimed. Distinct capability tiers require their own making route and qualification.
Making steps · draft selected for navigation; not a validated fabrication specification.
Known Parts and Tools
The selected route supplies this page's inventory and the map's dependency links from one record. Further requirements may be missing; review flags do not prove physical suitability.
| Requirement | Role | Use | Relationship status |
|---|---|---|---|
| Joint pull selected air-dried structural wood | Part | incorporated; blanks and sacrificial allowance separately allocated | Cycle-checked; compatibility unknown |
| Balance knife-edge pivot stock | Part | incorporated | Cycle-checked; compatibility unknown |
| Stone hand tools | Tool | reused making | Cycle-checked; compatibility unknown |
| Abrasive stones | Tool | reused making; abrasive wear losses | Cycle-checked; compatibility unknown |
| Fiber cord | Part | incorporated and consumed replacement allocation | Cycle-checked; compatibility unknown |
| Woven cloth | Part | consumed dry cleaning | Cycle-checked; compatibility unknown |
| Coarse comparison reference | Tool | verification; relative geometry only | Cycle-checked; compatibility unknown |
| Timber structures | Tool | reused making support | Cycle-checked; compatibility unknown |
| Coarse stone supports | Tool | reused making support | Cycle-checked; compatibility unknown |
| Containers | Tool | reused dry handling and waste | Cycle-checked; compatibility unknown |
| Dry storage cover | Tool | reused storage | Cycle-checked; compatibility unknown |
| Metalworking protection | Tool | reused cold making protection | Cycle-checked; compatibility unknown |
Making outline
- Cold shape a dry wood loading arm and support, lap a hard-mineral fulcrum, retain measured-arm suspension points and positive arrest features
- Detailed procedure and acceptance remain unresearched.
What remains unresolved
- Manufacture, quantities, suitability and complete inventory remain unreviewed.
- Current memory-first method needs source and compatibility review.
Canonical reuse assessment
{
"checked": [
"formation-gravity-lever-pivot",
"torque-reference-mass-hanger"
],
"decision": "Adjustable tensile/peel force path and arrest, distinct from formation compression lever or reference hanger."
}Used by
Items that directly require this item in their selected inventory.
Paths from Smartphone
These routes together include every item that can lead from Smartphone to this item. Repeated path combinations are collapsed; recipes are omitted.
Shortest route: Smartphone → Enclosure → Joint pull test fixture → Joint pull gravity loading lever and suspension
Enable JavaScript to see the routes covering every contributing item.