Part · discovery

Steatite trial fired furniture bodies

Separately shaped bodies trial-fired in an earlier fuel kiln, before actual dense-station hot-load/creep/thermal/contamination qualification; not final installed tooling.

Discovered · unresearchedClosure: OpenInventory incomplete

Capability requirements and tolerances

Consumer-specific numerical targets, quantities and acceptance limits remain open or incompletely reviewed. No smartphone-grade suitability is claimed. Distinct capability tiers require their own making route and qualification.

Making steps · draft selected for navigation; not a validated fabrication specification.

Known Parts and Tools

The selected route supplies this page's inventory and the map's dependency links from one record. Further requirements may be missing; review flags do not prove physical suitability.

Requirement	Role	Use	Relationship status
Steatite green furniture bodies	Part	incorporated candidate bodies; consumed extra trial witnesses	Cycle-checked; compatibility unknown
Kiln	Tool	reused earlier trial firing	Cycle-checked; compatibility unknown
Ceramic shaping/firing tools	Tool	reused	Cycle-checked; compatibility unknown
Finishing grinder	Tool	reused	Cycle-checked; compatibility unknown
Jigs and fixtures	Tool	reused	Cycle-checked; compatibility unknown
Optical inspection microscope	Tool	verification	Cycle-checked; compatibility unknown
Surface flatness verification kit	Tool	verification	Cycle-checked; compatibility unknown
Charcoal	Part	consumed firing and witness-run replenishment	Cycle-checked; compatibility unknown
Ambient firing air charge	Part	consumed firing and witness-run replenishment	Cycle-checked; compatibility unknown
Hand-drill ignition kit	Tool	reused	Cycle-checked; compatibility unknown
Bellows	Tool	reused	Cycle-checked; compatibility unknown
Tongs	Tool	reused	Cycle-checked; compatibility unknown
Hot handling kit	Tool	reused	Cycle-checked; compatibility unknown
Supports	Tool	reused	Cycle-checked; compatibility unknown
Clocks	Tool	verification	Cycle-checked; compatibility unknown
Time comparison reference	Tool	verification	Cycle-checked; compatibility unknown
Thermal radiance reference fixture	Tool	verification	Cycle-checked; compatibility unknown
Composition test instruments	Tool	verification	Cycle-checked; compatibility unknown
Reference materials	Part	verification	Cycle-checked; compatibility unknown
Dimensional instruments	Tool	verification	Cycle-checked; compatibility unknown
Length master reference	Tool	verification	Cycle-checked; compatibility unknown
Balances	Tool	verification	Cycle-checked; compatibility unknown
Mass master reference	Tool	verification	Cycle-checked; compatibility unknown
Temperature instruments	Tool	verification	Cycle-checked; compatibility unknown
Temperature fixed-point reference	Tool	verification	Cycle-checked; compatibility unknown
Workshop surfaces	Tool	reused	Cycle-checked; compatibility unknown
Containers	Tool	reused	Cycle-checked; compatibility unknown
Chemical effluent collection equipment	Tool	reused	Cycle-checked; compatibility unknown
Ventilation	Tool	reused	Cycle-checked; compatibility unknown
Chemical protection equipment	Tool	reused	Cycle-checked; compatibility unknown
Metalworking protection	Tool	reused	Cycle-checked; compatibility unknown
Finishing abrasive wheel	Part	consumed operation replacement reserve	Cycle-checked; compatibility unknown
Collected process water	Part	consumed wet finishing coolant and rinse replenishment	Cycle-checked; compatibility unknown
Water supply	Tool	reused operation	Cycle-checked; compatibility unknown

Making outline

Trial-fire separately shaped/dried candidate furniture bodies in a genuinely earlier fuel kiln on earlier coarse support, allocate extra same-feed witnesses and observe fired geometry/defects without claiming final hot-load acceptance
Detailed procedure and acceptance remain unresearched.

What remains unresolved

Manufacture, quantities, suitability and complete inventory remain unreviewed.
Current memory-first method needs source and compatibility review.

Canonical reuse assessment

{
  "existing_candidates_checked": [
    "steatite-duty-qualified-furniture-bodies",
    "refractories"
  ],
  "decision": "Distinct lower evidence/state tier preserves earlier trial firing without equating coarse pottery capability with finished ready furniture."
}

Return to the discovered map

Used by

No parent items are currently recorded in the selected map.

Paths from Smartphone

No selected physical path from Smartphone reaches this item. It is outside the current root map; no path is invented.